BakaBT > Need Help? Ask Here

convertxtodvd

(1/2) > >>

Gyrados:
Was wondering if anyone familiar with the program could answer this question. Basically everything goes perfectly until it comes time for the burn. Convertxtodvd just stops at 0.0% burning progress. I've found nothing useful using google and there seems to be some pretty knowledgeable people on these forums. I'll post the log... Maybe that will help...

2009-10-14 01:24:53   Info           BURN:  Write started 387408 sectors to write
2009-10-14 01:24:53   Info           BURN:  Init success: DVD+R
2009-10-14 01:24:53   Info           BURN:  Writing speed requested x4.0, effective x4.0
2009-10-14 01:24:51   Info           BURN:  Available write speed: 16x ,12x ,8x ,6x ,4x
2009-10-14 01:24:51   Info           BURN:  Media ID: RITEK-F16-01
2009-10-14 01:24:51   Info           BURN:  Media type: DVD+R
2009-10-14 01:24:51   Info           BURN:  DMA Mode
2009-10-14 01:24:51   Info           BURN:  Scanned files #7, folder #2 - total size 792305664 b. (756 Mb.)
2009-10-14 01:24:51   Info           BURN:  Inserted media type : DVD+R
2009-10-14 01:24:51   Info           BURN:  Write started
2009-10-14 01:24:49   ----           ***************** Encoding end **********************

SomeoneElse:
are you using a fresh disc? sometimes if you have a failed write, it looks clean, but it really isn't...

Gyrados:
Yeah... :( I can't figure it out...

Xiong Chiamiov:
Try using a different program?

Mikan:
Ive been using convertXtodvd for awhile, keep the disc out till its done converting and prompts for the disc. make sure the dvd drive is clean and that the disk is too. if the disk fails try another? Ive had one or two not work. but once you set it to burn if your on windows 7 or vista I noticed it hangs at 0.0% for a few minutes, just dont mess with it or touch the pc till you see it running. If your pc is much slower, its fine. (what I do/Watch for atleast)

Navigation

[0] Message Index

[#] Next page