Discussion Forums > Technology
New computer being built for upcoming PC titles!
TMRNetShark:
--- Quote from: Lupin on September 18, 2011, 02:16:08 PM ---
--- Quote from: AceHigh on September 18, 2011, 12:51:39 PM ---The problem is that silicon as a material has stability problems when handling frequency at 4,5 Ghz, thus you don't see CPUs over that 4,5 Ghz. They generally stop at 4GHz.
--- End quote ---
Bulldozer is said to have an SKU with a base frequency of 4.2GHz.
--- Quote from: AceHigh on September 18, 2011, 12:51:39 PM ---I believe the Ghz race stopped back when Intel released Pentium 4, after that both Intel and AMD have been getting more processing power due to multi core technology and improved architecture.
--- End quote ---
It stopped after Preshott. It was a losing battle. Heat generation was ramping up much faster than the frequency was.
If Pentium 4 was manufactured in Intel's manufacturing process (32nm or even 22nm) today, it would probably reached it's 10GHz promise from a decade ago.
--- End quote ---
HAHAHA, going from 90nm down to 32nm or even 22nm would definitely get it to 10 GHz. Then again, that 10 GHz would probably still not even compare in performance to any consumer CPU on the market today.
Spanks:
--- Quote from: TMRNetShark on September 18, 2011, 01:49:34 PM ---
--- Quote from: kureshii on September 18, 2011, 04:12:02 AM ---
--- Quote from: TMRNetShark on September 17, 2011, 08:33:32 PM ---So no, I don't have an i7 processor that can take over the world, but I do have a processor that it quite powerful... powerful enough to keep up with an i7 980X at a fraction of the cost.
--- End quote ---
Linking to a benchmark that’s obviously showing GPU-bottlenecked performance doesn’t help your case at all … inb4moresarcasm.
You could have saved a bit of cash by going with an X4 965 BE, and you’d only have to give up a bit of gaming performance—ohwait, you won’t. Heck, looking at it, an i3-2100 makes a pretty competitive budget alternative for gaming as well, although I’d go with the X4 for better multi-threaded performance in other tasks.
That money you save can go toward getting an AM3+ motherboard to ease the transition into Bulldozer, or toward other GPU options. Or you can pick up another 2GB RAM, go with a 2×4GB config for just $6 more (pity you missed it a week or two ago when it was $36).
But it’s okay, I get it, it’s just more of that special brand of sarcasmsauce~
--- End quote ---
Your sight sees only so far, doesn't it? The 1055T and the 965BE are only $20 difference, right? (Plus you probably don't read previous posts)
I plan on OVERCLOCKING the 1055T. The 1055T is very easily Overclockable and I got a mobo that easily allows me to do that. True, a 965BE can also be overclocked well to 4GHz, but it only has 4 cores. I can Overclock my 1055T to 4GHz... and I bought the extra cooling equipment to get benchmark results that show that the 1055T is very beastly when overclocked while using multi-thread friendly applications (which most games these days take advantage of). Do your research, cause I did. 8)
AM3+? Ummm, if the new line of AMD processors were so good, I can definitely see them making better ones in 2 years when I would plan on getting an new computer. As of right now, all I see is those new APU's that aren't that impressive to me. 6 GBs of RAM is plenty enough for now (I would never be using that extra 2 GBs anyways).
Don't get me started on the Videocard... The 6850 performs very well for the price.
Then again, I bought the 1055T, aftermarket heatsink+fan, the 6850 GPU, 6 GBs of Corsair RAM, a 320 GB HD, A two-fan installed case, A mobo, and a 575W PSU for $500 shipped. It's cool to hate... :)
--- End quote ---
the prices I was going were in my country so I was going those for my advice. good luck overclocking your 1055t without being able to change the multiplier. I don't know if I just got a dodgy 1055t but it is crap for overclocking compared to the slightly more expensive 1075t or 1090t mainly because of the multi unlock and better chance of getting a good one. and yes I did my research, but that was more then a year ago when I bought a 1055t, now I happily run a 1090t conservatively overclocked to 4gh, though probably not during the upcoming summer.
do tell of your overclocking experience when yoy have done so.
sorry about the bad editing, doing this from a phone
AceHigh:
--- Quote from: TMRNetShark on September 18, 2011, 02:20:39 PM ---
--- Quote from: Lupin on September 18, 2011, 02:16:08 PM ---
--- Quote from: AceHigh on September 18, 2011, 12:51:39 PM ---The problem is that silicon as a material has stability problems when handling frequency at 4,5 Ghz, thus you don't see CPUs over that 4,5 Ghz. They generally stop at 4GHz.
--- End quote ---
Bulldozer is said to have an SKU with a base frequency of 4.2GHz.
--- Quote from: AceHigh on September 18, 2011, 12:51:39 PM ---I believe the Ghz race stopped back when Intel released Pentium 4, after that both Intel and AMD have been getting more processing power due to multi core technology and improved architecture.
--- End quote ---
It stopped after Preshott. It was a losing battle. Heat generation was ramping up much faster than the frequency was.
If Pentium 4 was manufactured in Intel's manufacturing process (32nm or even 22nm) today, it would probably reached it's 10GHz promise from a decade ago.
--- End quote ---
HAHAHA, going from 90nm down to 32nm or even 22nm would definitely get it to 10 GHz. Then again, that 10 GHz would probably still not even compare in performance to any consumer CPU on the market today.
--- End quote ---
Guys, do you keep forgetting that it can't pass 4,5GHz no matter how small they make it as long as it is made from silicon? Oscillating that material is a bitch above that frequency.
kitamesume:
^ how would you explain the recorded overclocks of 5Ghz from the core2duos and sandybridges?
bloody000:
TMRNetShark :
Hexa-core doesn't do shit in games. Especially not when you have a measly 6850, it's a condition called GPU-bound. And when you overclock you will wish you had paid for a BE and better board instead. There are only four phases on the board and zero MOSFET heatsink, don't be surprise if it can't handle the load and fry itself.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version